Product Description
|
Steel Cut Wire Shot Production Process |
|
1. Production of steel cut wire shot starts with high-grade steel which is melted in a furnace and then cast into billets or long, continuous strips of steel. 2. The billets are then reheated to a specific temperature, cut into small sections and shaped into wire rods through rolling operations. 3. The wire is drawn through dies, reducing its diameter and increasing its length while creating the wire from which the shot will be cut. 4. Post-production treatments involve cleaning and grading for size consistency in order to meet required specifications for diameter and length. 5. Different grades of steel cut wire shot are adjusted according to customer needs and the specific application. 6. Strict safety protocols are enforced throughout production as well as rigorous quality control tests for hardness, size consistency, and structural integrity before distribution.
|
|
Specification |
|||||||
|
0.6MM |
0.8MM |
1.0MM |
1.2MM |
||||
|
1.5MM |
1.8MM |
2.0MM |
2.5MM |
3.0MM |
|||
|
Parameters |
||||||||
|
Material |
Chemical composition |
Microhardness |
Minimum |
Microstructure |
||||
|
45# Brand new steel 2.5mm、3.0mm |
C |
Mn |
Si |
S |
P |
48~53 HRC |
7.4g/cm3 |
Uniformly |
|
0.45% |
0.30~ |
0.15~ |
≤0.05% |
≤0.05% |
45~50 HRC |
|||
|
40~45 HRC |
||||||||
|
70# Brand new steel 2.5mm、3.0mm |
0.70% |
50~55 HRC |
||||||
|
40~50 HRC |
||||||||
|
80# Brand new steel 2.5mm、3.0mm |
0.80% |
50~60 HRC |
||||||
|
48~52 HRC |
||||||||
|
Tire wire Used wire 2.5mm、3.0mm |
0.70% |
50~55 HRC |
||||||
|
45~50 HRC |
||||||||
|
55# Brand new steel 2.5mm、3.0mm |
0.55% |
40~45 HRC |
||||||
|
Application |
|
1. Steel cut wire shot is a versatile solution that can be used effectively for blast cleaning, rust removal, shot peening, and shot blasting. 2. Steel cut wire shot excels at descaling for forging purposes, working on various surfaces such as castings, forgings, steel plates, H-type steel, and steel structures. 3. Steel cut wire shot offers great results when it comes to gear applications and heat treatment processes during shot peening. 4. Steel cut wire shot is perfect for shot blasting steel boards, profile steels, ship boards, and steel materials. 5. Steel cut wire shot’s efficiency makes it an excellent pre-treatment solution before painting. 6. Choose steel cut wire shot for optimal performance in any application. |
